freightliner 122SD, Руководство по обслуживанию

Страница: 22 / 132

The M3 Maintenance Interval Operations table lists
all maintenance operations that are to be performed
at the M3 maintenance interval. Maintenance opera-
tion numbers are reference numbers used to help you find detailed instructions in this manual on the
maintenance operations to be performed. Perform all
M1 and M2 maintenance interval operations at the
M3 maintenance interval.
Maintenance
Operation Number
M3 Maintenance Interval Operations for Service Schedules I, II, III, and IV
•
Schedule I: every 15,000 miles (24 000 km) or 1500 hours
•
Schedule II: every 150,000 miles (240 000 km)
•
Schedule III: every 300,000 miles (483 000 km)
•
Schedule IV: every 300,000 miles (483 000 km)
Check
00–04 Perform All M1 Operations
00–05 Perform All M2 Operations
09–01 Air Cleaner Inspection
20–02 Radiator Pressure-Flushing and Coolant Change
26–01 Eaton Fuller Transmission Fluid Change, and Magnetic Plug Cleaning
35–01 Axle Lubricant and Filter Change, and Magnetic Strainer Cleaning (synthetic lubricant)
42–02 Bendix Air Dryer Desiccant Replacement
42–10 Bendix E–6 Foot Control Valve Inspection and Lubrication
42–11 WABCO System Saver Air Dryer Desiccant Cartridge Replacement
46–02 Power Steering Fluid and Filter Change
Table 10, M3 Maintenance Interval Operations for Service Schedules I, II, III, and IV
General Information
00
M3 Maintenance Interval Operations: 00–06
122SD and Coronado 132 Maintenance Manual, February 2016
00/14