TM
Z9-IO-PE-ZE
IOEX-4440;
4422; 4404
Quick Start Guide
FreeWave ZumEdge Quick-Start
The ZumEdge is designed to quickly add I/O and application development capability to your Ethernet and serial
IIoT systems. This guide will get you started with configuring the ZumEdge and I/Os to your application, and
introduce you to the application development environment that comes standard on the ZumEdge. To get
started, please follow this guide for initial configuration of the device.
To follow along with your device, you will need at least a ZumEdge base module and a FreeWave IOEX device,
as well as a computer running Windows with a free Ethernet port that you can use to connect to the ZumEdge
device. If no Ethernet port exists, a USB-to-Ethernet adapter will work in an identical way.
The example system used in this quick-start guide is a common tank level monitoring implementation.
We’ll use the ZumEdge to configure an IO module to deliver power to, and receive analog input from, a
tank level sensor, with the assumption that the user will be communicating with the device through a REST
API running on their control application. Once configured, the user will be able to read from, write to, and
fully reconfigure the ZumEdge and IO devices through REST API calls.
Example System Implementation
Data Connectors
Four RJ-45 (2 Ethernet, 2 Serial)
USB Connectors
Micro USB
Type A (Future Expansion)
RF Connector
TNC
Power Connectors
Phoenix Contact (#1776692)
Interfaces
Frequency Range*
902 to 928 MHz
Output Power*
10 mW to 1 W; user selectable
Range
97 km (60 miles) with clear line of sight
Channel Spacing
230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
3225.6 kHz
RF Data Rate
115.2, 250, 500 kbps, 1, 1.5 (Beta), & 4 Mbps;
user selectable
Transmitter
Type
Frequency Hopping Spread Spectrum
Modulation
2 level GFSK
4- and 8-ary FSK
Link Throughput
Up to 1.6 Mbps; 4 Mbps with Compression
Error Detection
ARQ and CRC, retransmit on error, FEC
Hopping Rates
400, 200, 100, 50, 25 ms
Hopping Channels*
Up to 110; RF Data Rate Dependent
Hopping Patterns
Up to 16; RF Data Rate Dependent
Protocol
Adaptive Spectrum Learning (ASL)
User Interface Rates
Ethernet Rate: 10/100 Mbps
Serial Rate: up to 250 kbps
Data Encryption
128-bit and 256-bit AES CCM
Advanced Features
Packet Compression and Aggregation
Data Transmission
CPU
ARM Cortex-A8 1 GHz
RAM
1 GB
Storage
1 GB
OS
Debian-based Linux
Computing Resources (OPTIONAL UPGRADE)**
Contact FreeWave Sales for information.
**Requires licensing. Contact FreeWave Sales for information.
|
ZumLink™ 900 Series
5395 Pearl Parkway
Boulder, CO 80301
Copyright © 2019 FreeWave Technologies, Inc. All rights reserved.
LDS0010AA
TF:
1.866.923.6168
Tel:
303.381.9200
www.freewave.com
Management
HTTP, SSH
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
Modbus
Management
VLAN
802.1Q
Serial
TCP server, Modbus/TCP, Modbus RTU,
TCP client
Networking
Operating Voltage
+6 to +30 VDC
Current Consumption
Voltage
Transmit
Receive
Idle
12 VDC
377 mA
159 mA
143 mA
Power Requirements
Operating
Temperature
Z9-P2:
-40ºC to +85ºC (-40°F to +185°F)
Z9-PE2:
-40ºC to +75ºC (-40ºF to +167ºF)
Humidity
0 to 95% non-condensing
Dimensions
Z9-P2:
170.18 L x 86.6 W x 27.18 H (mm)
6.70 L x 3.41 W x 1.07 H (in)
Z9-PE2:
191.00 L x 104.39 W x 41.91 H (mm)
7.52 L x 4.11 W x 1.65 H (in)
Weight
Z9-P2:
200.5 g (0.44 lbs)
Z9-PE2:
750 g (1.7 lbs)
Reliability
MTBF 206,186
Safety
Class I, Division 2, Groups A-D
UL
Z9-P2:
Z9-PE2:
General Information
Information to Order
Model Number
Z9-P2
Board Level Unit, 902 to 928 MHz
Z9-PE2
Enclosed Unit, 902 to 928 MHz
Receiver
IF Selectivity
> 40 dB
System Gain
135 dB
Sensitivity
RF Data Rates Without FEC
With FEC
115.2 kbps
-105 dBm
-108 dBm
250 kbps
-102 dBm
-105 dBm
500 kbps
-99 dBm
-102 dBm
1 Mbps
-95 dBm
-98 dBm
1.5 Mbps (Beta) -90 dBm
-93 dBm
4 Mbps
-83 dBm
-86 dBm
ZumEdge
TM
Transmitter
Management
Networking
Interfaces
Power Requirements
General Information
Information to Order
Model Number
Receiver
Data Transmission
Computing Resources (OPTIONAL UPGRADE)**
+6 to +30 VDC
0 to 95% non-condensing
165.28 L x 76.89W x 27.55 (mm))
6.51 L x 3.03 W x 1.08 H (Inches)
ZumEdge
IO Expansion
0.5lbs/250C
MTBF 206,186
Class I, Division 2, Groups A-D
Frequency Range*
Output Power*
Range
Management
VLAN
Serial
Traffic Filtering
Data Connectors
USB Connectors
RF Connector
Power Connectors
Operating Voltage
Voltage
Transmit
Receive
Idle
Current Consumption
Humidity
Dimensions
Weight
Reliability
Safety
UL
Z9-IO-PE-ZE
IOEX-4440; 4422;4404
Operating
Temperature
Channel Spacing
RF Data Rater
IF Selectivity
System Gain
Type
Modulation
Link Throughput
Error Detection
Hopping Rates
Hopping Channels*
Hopping Patterns
Protocol
User Interface Rates
Data Encryption
Advanced Features
CPU
RAM
Storage
OS
Sensitivity
RF Data Rates
Without FEC
With FEC
902 to 928 MHz
HTTP, SSH
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
Modbus
802.1Q
Netmask filter, ARP filter
Four RJ-45 (2 Ethernet, 2 Serial)
TNC
Phoenix Contract (#1776692)
+6 to +30 VDC
12 VDC
377 mA
159 mA
143 mA
Micro USB
Type A (Future Expansion)
TCP server, Modbus/TCP, Modbus RTU,
TCP client
10 mW to 1 W: user selectable
97 km (60 miles) with clear line of sight
Frequency Hopping Spread Spectrum
Up to 1.6 Mbps; 4 Mbps with Compression
ARQ and CRC, retransmit on error, FEC
400, 200, 100, 50, 25 ms
Up to 110; RF Data Rate Dependent
Up to 16; RF Data Rate Dependent
Adaptive Spectrum Learning (ASL)
128-bit and 256-bit AES CCM
Packet Compression and Aggregation
ARM Cortex-A8 1 GHz
1 GB
1 GB
Debian-based Linux
> 40 dB
135 dB
115.2 kbps
-105 dBm
-108 dBm
250 kbps
-102 dBm
-105 dBm
500 kbps
-99 dBm
-102 dBm
1 Mbps
-95 dBm
-98 dBm
1.5 Mbps (Beta) -90 dBm
-93 dBm
4 Mbps
-83 dBm
-86 dBm
230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
3225.6 kHz
115.2, 250, 500 kbps, 1, 1.5 (Beta), &4 Mbps;
user selectable
2 level GFSK
4- and 8-ary FSK
Ethernet Rate; 10/100 Mbps
Serial Rate; up to 250 kbps