background image

This document contains information on a new product. Specifications and information herein 
are subject to change without notice.

© Freescale Semiconductor, Inc., 2005. All rights reserved.

PRELIMINARY—SUBJECT TO CHANGE WITHOUT NOTICE

Freescale Semiconductor

1

Overview

The SEC2 device driver manages the operation of the SEC 2.0 
commonly instantiated into PowerQUICC processors. It is a fully 
functional component, meant to serve as an example of application 
interaction with the SEC2 core.

The driver is coded in ANSI C. In it’s design, an attempt has been 
made to write a device driver that is as operating system agnostic 
as practical. Where necessary, operating system dependencies are 
identified and 

Section 8, “Porting”

 addresses them.

Testing has been accomplished on VxWorks 5.5 and LinuxPPC 
using kernel version 2.4.27. 

Application interfaces to this driver are implemented through the 

ioctl()

 function call. Requests made through this interface can 

be broken down into specific components, including 
miscellaneous requests and process requests. The miscellaneous 
requests are any requests not related to the direct processing of 
data by the SEC2 core.

Process requests comprise the majority of the requests and all are 
executed using the same 

ioctl()

 access point. Structures needed 

to compose these requests are described in detail in 

Section 3.3.6, 

“Process Request Structures.”

Throughout the document, the acronyms CHA (crypto hardware 
accelerator) and EU (execution unit) are used interchangeably. 

SEC2SWUG

Rev. 0, 02/2005

Contents

1. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1

2. Device Driver Components   . . . . . . . . . . . . . . . . . . . .  3

3. User Interface  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5

4. Individual Request Type Descriptions   . . . . . . . . . . .  14

5. Sample Code  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  36

6. Linux Environment  . . . . . . . . . . . . . . . . . . . . . . . . . .  39

7. VxWorks Environment  . . . . . . . . . . . . . . . . . . . . . . .  40

8. Porting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  41

SEC 2.0 Reference Device Driver 
User’s Guide

Содержание SEC 2.0













































Отзывы: