manualshive.com logo in svg

Freescale Semiconductor MCF54455, Справочное руководство

Поделиться
Скачать
Freescale Semiconductor MCF54455 Скачать руководство пользователя страница 579

Advanced Technology Attachment (ATA)

23-4

Freescale Semiconductor

23.2.1

Detailed Signal Descriptions

For a detailed description of the ATA bus signal, refer to the ATA-6 specification.

23.2.1.1

ATA Reset (ATA_RESET)

This output signal is the ATA reset signal. When asserted, the ATA bus is in reset state. When negated, no 
reset. The ATA bus is in reset when the appropriate bit in the control register is cleared. After system reset, 
the ATA bus is in reset.

23.2.1.2

ATA DIO Read (ATA_DIOR)

This output signal corresponds to the ATA signal DIOR. During PIO and multiword DMA transfer, 
function is read strobe. During ultra DMA in burst, function is HDMARDY. During ultra DMA out burst, 
function is host strobe.

23.2.1.3

ATA DIO Write (ATA_DIOW)

This output signal corresponds to ATA signal DIOW. During PIO and multiword DMA transfer, function 
is write strobe. During ultra DMA burst, function is STOP, signalling when host wants to terminate running 
ultra DMA transfer.

23.2.1.4

ATA Chip Selects (ATA_CS[1:0])

These output signals are the chip selects for the ATA bus.

23.2.1.5

ATA Address Lines (ATA_DA[2:0])

These output signals are the address lines of the ATA bus.

23.2.1.6

ATA DMA Request (ATA_DMARQ)

This input signal is the ATA bus device DMA request. The device asserts it if it wants to transfer data using 
multiword DMA or ultra DMA mode

23.2.1.7

ATA DMA Acknowledge (ATA_DMACK)

This output signal is the ATA bus host DMA acknowledge. The host negates it when it grants the DMA 
request. 

23.2.1.8

ATA Interrupt Request (ATA_INTRQ)

This input signal is the ATA bus interrupt request. The device asserts it when it wants to interrupt the host 
CPU.

23.2.1.9

ATA I/O Ready (ATA_IORDY)

This input signal is the ATA bus I/O channel ready signal. It has three functions:

Содержание MCF54455


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды