Freescale Semiconductor MC13853 LNA, Руководство пользователя

Страница: 6 / 22

MC13853 LNA Evaluation Board User’s Guide, Rev. 1.3
vi Freescale Semiconductor
• ESD protection procedures must be followed. As a minimum, test equipment should be grounded,
a grounded hand strap must be used, and the lab bench fitted with a conductive mat (not exceeding
1 M
Ω
to ground).
Definitions, Acronyms, and Abbreviations
The following list defines the acronyms and abbreviations used in this document.
DCS1800 1800 MHz cellular band, MS transmit 1710 to 1785 MHz
EDGE Enhanced Data Rates for GSM Evolution, uses 3pi/8 PSK modulation
EGSM900 900 MHz cellular band, MS transmit 880 to 915 MHz
EGPRS Enhanced General Packet Radio Service
ESD Electrostatic Discharge
EVB Evaluation Board, usually a multilayer printed circuit
GPIB General Purpose Instrumentation Bus, uses IEEE488.2 standard
GSM Global System Mobile, uses GMSK modulation
GSM850 850 MHz cellular band, MS transmit 824.0 to 849.0 MHz
PCS1900 1900 MHz cellular band, MS transmit 1850 to 1910 MHz
SPI Serial Peripheral Interface
VSWR Voltage Standing Wave Ratio
References
1. MC13853 Data Sheet, Rev. 1.6, 08/2007 Freescale Semiconductor, Tempe AZ.
2. Digital Cellular Telecommunications System - Radio Transmission And Reception- 3GPP TS
05.05; TS 100 910. European Telecommunications Standard Institute (ETSI Sophia Antipolis
France, www.etsi.org).
3. Digital Cellular Telecommunications System - Mobile Station Conformance Specification - GSM
11.10 European Telecommunications Standard Institute (ETSI Sophia Antipolis France,
www.etsi.org).