Freescale Semiconductor i.MX 6SoloLite Linux Скачать руководство пользователя

Страница: 73 / 199

7.3.4 Completion Notification

There are two ways for an application to receive notification that a PxP operation has
completed.

• Call dma_wait_for_async_tx(). This call causes the CPU to spin while it polls for the

completion of the operation.

• Specify a completion callback.

The latter method is recommended. After the PxP operation completes, the PxP output
buffer data can be retrieved.

For general information for DMA Engine Framework, please refer to Documentation/
dmaengine.txt

in the Linux kernel source tree.

7.3.5 Limitations

• The driver currently does not support scatterlist objects in the way they are

traditionally used. Instead of using the scatterlist parameter object to provide a chain
of memory sources and destinations, the driver currently uses it to provide the input
and output buffers (and overlay buffers, if needed) for one transfer.

• The PxP driver may not properly execute a series of transfers that is queued in rapid

sequence. It is recommended to wait for each transfer to complete before submitting
a new one.

7.4 Menu Configuration Options

The following Linux kernel configuration option is provided for this module:

Device Drivers --->

DMA Engine support --->

[*] MXC PxP support

[*] MXC PxP Client Device

7.5 Source Code Structure

The PxP driver source code is located in drivers/dma/ and include/linux/.

Chapter 7 Pixel Pipeline (PxP) DMA-ENGINE Driver

i.MX 6SoloLite Linux Reference Manual, Rev. L3.0.35_4.1.0, 09/2013

Freescale Semiconductor, Inc.

Содержание i.MX 6SoloLite Linux








































































































































































































Результаты поиска

Содержание i.MX 6SoloLite Linux

Отзывы:

Похожие инструкции для i.MX 6SoloLite Linux

Бренды по названию

Популярные бренды

Freescale Semiconductor i.MX 6SoloLite Linux, Справочное руководство

Результаты поиска

Содержание i.MX 6SoloLite Linux

Отзывы:

Похожие инструкции для i.MX 6SoloLite Linux

Бренды по названию

Популярные бренды