manualshive.com logo in svg

Freescale Semiconductor i.MX 6DualLite, Справочное руководство

Поделиться
Скачать
Freescale Semiconductor i.MX 6DualLite Скачать руководство пользователя страница 261

36.1.4 Features

Listed below are the various features supported by i.MX 6 as a PCI Express Root
Complex driver.

• Express Base Specification Revision 2.0 compliant
• Gen1 operation with x1 link supporting 5 GT/s raw transfer rate in single direction
• Support Legacy Interrupts (INTx), and MSI
• Configurable Max_Payload_Size size (128 bytes to 4 KB)
• 4-KB maximum Request size
• It fits into Linux PCI Bus framework to provide PCI compatible software

enumeration support

• In addition, it provides interface to Endpoint Drivers to access the respective devices

detected downstream.

• The same interface can be used by the PCI Express Port Bus Driver framework in

Linux to perform AER, ASP etc handling

• Interrupt handling facility for EP drivers either as Legacy Interrupts (INTx).
• Access to EP I/O BARs through generic I/O accessories in Linux PCI subsystem.
• Seamless handling of PCIe errors

NOTE

Out of the above, MSI, I/O access, Port Bus Driver
integration are currently incomplete.

36.2 Linux PCI Subsystem and RC driver

In Linux, the PCI implementation can roughly be divided into following main
components: PCI BIOS architecture specific Linux implementation, Host Controller (RC)
Module, and Core.

• PCI BIOS Architecture specific Linux implementation to kick off PCI bus

initialization. It interfaces with PCI Host Controller code as well as the PCI Core to
perform bus enumeration and allocation of resources such as memory and interrupts.
The successful completion of BIOS execution assures that all the PCI devices in the
system are assigned parts of available PCI resources and their respective drivers
(referred as Slave Drivers). PCI can take control of them using the facilities provided
by PCI Core. It is possible to skip resource allocation (if they were assigned before
Linux was booted, for example PC scenario).

• Host Controller (RC) Module handles hardware (SoC + Board) specific initialization

and configuration and it invokes PCI BIOS. It should provide callback functions for

Chapter 36 i.MX 6 PCI Express Root Complex Driver

i.MX 6Solo/6DualLite Linux Reference Manual, Rev. L3.0.35_4.1.0, 09/2013

Freescale Semiconductor, Inc.

261

Содержание i.MX 6DualLite










































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды