|Babbage 2.5 Ubuntu Startup Guide
Because of an order from the United States International Trade Commission, BGA-packaged
product lines and part numbers indicated here currently are not available from Freescale for
import or sale in the United States prior to September 2010: i.MX51 Product Family
-
Connect a DVI cable in the DVI port on Babbage board (P4) and on the other site
plug it to a monitor (that at least supports 800x600)
-
Connect an Ethernet cable to the Ethernet connector (P3)
-
Connect USB keyboard and mouse to the Dual-USB_A connector
-
Connect speaker or headphone if audio is desired. JK1 audio jack (optional)
-
Connect the 5V supply
-
Press the SW1 push button around ~5 seconds to power up and make sure that
you see the boot message on the UART console (hyperteminal or minicom).
DISP-Card
Connector
Micro_USB
Connector
MIC_IN
Jack
Audio
Jack
Mini_PCI
Connector
LVDS
Connector
DVI Connector
UART
Connector
Power
Jack
Ethernet
Connector
Dual-
USB_A
Connector
MMC/SD
Connector
POWER
Button SW1
RESET
Button SW2
ACCESSORY_CA
RD Connector
