Freedom R8100 SERIES, Руководство оператора

Страница: 209 / 255

209
Export Procedure
Export one or more procedures from the unit’s hard drive to a USB drive. When selected, a list of
procedures available for export is provided.
Note: Visible only when a USB drive is inserted into the unit and there is at least one procedure
available for export.
Delete Scripts
Deletes the selected script from the unit’s hard drive and removes all references to it from the script list.
After being deleted, that script must be imported again to use it in AutoScript.
Note: Visible only when a script exists on the unit’s hard drive.
Delete Procedure
Deletes the selected procedure from the unit’s hard drive. After being deleted, that procedure must be
either imported again or recreated from available scripts on the unit’s hard drive to be used in AutoScript.
Note: Visible only when a procedure exists on the unit’s hard drive.
2.2.7.11.1 How-To
In order to use the AutoScript feature, scripts must be created and imported to the unit. Script format
follows the Monitor and Control (M&C) command format as detailed in the R8100 Monitor & Control
Programmer’s Guide (CG-1110). Each line in the script is to contain an M&C command and must
conform to M&C syntax rules.
Scripts may be created or edited using a text editor such as Windows Notepad. Script file names must
end in “.txt”. Procedure file names must end in “.prc”.
Figure 2.2.7.11-5. Example script showing commands for finding a local FM radio station