Freedom R8000 Series, Руководство пользователя, Страница: 56 / 72

AutoTune for Motorola APX Series Radios User Guide
48
6.12. Rx Analog Sensitivity (SINAD)
This is a test only; there is no alignment.
RF Control Port Frequency Modulation Level
Generate RF IN/OUT Test Freq FM, 60% rated deviation -50 dBm
Table 6-22. Analyzer Configuration for Rx Analog Sensitivity (SINAD) test
6.12.1. Test
The analyzer is setup as specified in this section’s Analyzer Configuration table. The
radio is placed into Test Mode at the lowest RX Test Frequency. The radio audio output
level is tested and if insufficient to measure SINAD the volume is increased until
sufficient to measure SINAD. The output level of the analyzer is then adjusted until the
radio audio signal’s SINAD level measures about 12 dB. The current analyzer output
level is then compared against test limits. The final results are written to the log file.
Name Description
Result Pass or Fail. 12dB SINAD level within Max Limit
Frequency Test Frequency
12dB SINAD Analyzer output level at which the radio SINAD level measures 12 dB
Max Limit Maximum Limit (inclusive) for Rx Analog Sensitivity (SINAD) to Pass
Table 6-23. Rx Analog Sensitivity (SINAD) test results