Freedom Lite Installation Manual Revision 12
P a g e
23 | 30
ensure that it is practical to clearly label the inverter output section of the DB so that it is
clearly evident that this section will remain live despite the utility incomer being off.
Observe the relevant regulations.
Several important settings must be correctly configured in the Color Control,
Multiplus/Quattro, and charge controller. The latest firmware versions must also be
installed in each case. Please refer to Victron manuals or contact Freedom Won for
assistance with this.
Guidelines at this link will also be useful:
https://www.victronenergy.com/live/battery_compatibility:freedomwon
5.2
Victron Inverter and Grid Tie Inverter
The main alternative to installing a DC charge controller is shown in Figure 8.2. This system
incorporates a grid tie inverter (GTI) or PV inverter on the consumption side of the battery
inverter.
Aside Note: It is also possible to install a GTI on the grid side of the battery inverter but this
option is not recommended when connected to an unreliable grid because the PV potential
cannot be utilized during an outage, as the GTI will shut down without the grid power being
present.
Figure 5.2 Installation Example using a Victron Battery Inverter and a Grid Tie Inverter with a
Freedom Lite 10/7