Freedom CGX Extra Wide, Руководство пользователя

Страница: 27 / 36

25
Adjustments
Flip Arm / Locking Arm
To adjust height of armrests, loosen and
remove the bolts and nuts holding the arm
to the backpost tube. Align holes in arm with
holes in backpost tube at desired height.
Re-assemble with bolts and nuts.
Castor Fork Adjustment
Interchanging castors can easily be done with
dual hole castor forks. Currently, 3”, 4” 5”,
6” & 7” castors are available for use (check
prescription form for options). To adjust, loosen
the bolt and remove the castor. Change the
castor and/or position the castor upward or
downward in pre-drilled holes on the castor
fork. Replace the bolt and tighten securely.
Note: When changing the size of the
castor wheel, it will also be necessary to change
the size of the rear wheel in order to keep the
wheelchair frame parallel with the floor.
Wheel Lock Adjustment
When the rear wheel is repositioned, it is important
that the wheel lock is readjusted also.
1. Adjustment can be made by loosening the
1/4-20 x 1” (25.4mm) button head screws
and sliding the wheel lock assembly along the
frame tubing so that the wheel lock contacts
the tyre in the locked position. Continue to
adjust until the knurled grip handle
embeds into the tyre approximately
6.35mm (1/4”) when in the locked position.
Tighten the screw until wheel lock is snug
to frame tube.
Warning:
Wheel locks are not designed to slow the
chair down when it is moving. When the
chair is stopped, engaging properly adjusted
wheel locks will prevent the Drive wheels
from turning.