12
TOPAZ
Connectivity Pack User’s Guide
Using the TOPAZ Camera Controls
The following diagram illustrates the various controls located on the
front of the TOPAZ. These controls operate differently while the
Connectivity Pack is attached. Below you will find descriptions of their
new behaviors. Each control on the camera module is described from
left to right.
Note:
When the Connectivity Pack is connected the
POWER
button on the TOPAZ will only control the TOPAZ lights
and Camera. The
POWER
button on the control pad will
turn the Connectivity Pack and the TOPAZ on and off
including putting the monitor in standby (you still need to
turn your computer on and off in the usual way).
