18
Connecting to a Network
ElBraille can connect to wireless networks. You can also connect the unit to
mobile networks using the built-in LTE modem. The following sections
describe how to connect to these networks.
Connecting to a Wi-Fi Network
1. Press
WINDOWS Key+I
(
DOTS 4-8 CHORD,
DOTS 2-4
) to open
Windows Settings.
2. Navigate to Network and Internet and press
DOT 8
.
3. Select Wi-Fi and press
DOT 8
.
4. Select the Show available networks link and then navigate to the list
of available networks.
5. Use the
Left
Rocker
bar to select the network you want to connect
to and press
DOT 8
. The Connect Automatically check box and the
Connect button will appear. The check box is selected by default. If
you want to connect to the network only once, clear this check box.
6. Press
DOTS 4-5 CHORD
to navigate to the Connect button and
press
DOT 8
again. If the network is secure, you are prompted to
enter a password.
7. Type in the password and press
DOT 8
. If the connection is
successful, you will see “Connected” near the selected network in
the networks list.
Connecting to a Mobile Network
Before you can connect to a cellular network to use its data, you must first
turn on the ElBraille's internal modem by doing the following:
1. Press
E1
followed by
U
to open the ElBraille Utilities menu.
2. Use the Left Rocker bar to navigate to Settings and press
DOT 8
.
3. Select Modem and press
SPACEBAR
to enable it.
4. Navigate to the OK button and press
DOT 8
.
