Thank you for purchasing the cutting edge of hands-free,
wireless technology of Free2Talk.
This user guide will get you started and ready to make the
most of your Bluetooth Solar Visor Carkit.
The Solar Visor Carkit is compatible with most Bluetooth
mobile phones. Fully portable, it is an ideal wireless
communication solution for in-car or office use within a
maximum range of 10 meters (32 feet). Echo Cancellation and
Noise Suppression are built integrally allowing the Bluetooth
Carkit to provide you with impeccable sound quality in full
duplex mode.
1. Appearance and Function
(1) Speaker
(2) Microphone
(3) LED
(4) Charging Socket
(5) Mute Button
(6) MFB Button (Multi-Function
Button)
(7) Volume Increase (+)
(8) Volume Decrease (-)
(9) Solar Panel
(10) Windshield Mount
2. Recommend Installation Position
It is recommended that the Carkit is positioned on to the top
of the windshield as shown in the pictures below:
WARNING: Do not place or store the Carkit over the area of
the automobiles safety airbag deployment, or it may cause
serious injury when a safety airbag deploys.
3. Charging Your Carkit
The Carkit comes with a built-in rechargeable battery. Prior to
using the Carkit, it is recommended to charge the battery fully
for the first time.
Using the Car charger
• Insert the car charger firmly into the charging slot.
• Full charge time is approximately 2 hours.
Using Solar Power
• Ensure that the Carkit is installed to the recommended
installation position (as illustrated above).
• The Carkit recharges itself as soon as it is receives adequate
sunlight.
Note: The solar charging gauge is if the Carkit receives
sufficient sunlight for 2 hours, it equates to extending the
Talk-time by 1 hour or 50 hours of Standby Time.
WARNING: Do not attempt to charge the Carkit with any
charger other than the one provided.
4. Turning ON/OFF the Carkit
Power On:
Press and hold the “MFB” button for four seconds
and the flashing blue LED light indicator comes.
NOTE: Do not hold the button down for more than 8 seconds
when turning on the Carkit or else it may switch to its pairing
mode. If this happens, turn off the Carkit and repeat the
process for turning on the Carkit.
Power Off:
Press and hold the “MFB” button until the LED
light indication goes off.
5. Pairing Carkit with Mobile Phone
Pairing is the process of connecting your Carkit with your
mobile phone. Before using the Carkit with your mobile phone,
you must pair both devices. If you wish to use your Carkit with
a different mobile phone, you must reinitiate the pairing
process with your intended Bluetooth mobile phone. The steps
below describe pairing instructions for a typical Bluetooth
enabled mobile phone.
(1) Place the Carkit and mobile phone no more than 1 meter (3
feet) apart.
(2) Ensure the Carkit is turned off.
(3) Press and hold the “MFB” button for at least 6 seconds until
the LED flashes red and blue simultaneously, it is now ready for
pairing.
(4) Activate the pairing feature on your mobile phone. Refer to
your mobile phone’s user guide.
(5) Select “Free2Talk BC902” from the list of searched devices
and enter the default pin code “0000”, when prompted by
your mobile phone system.
(6) When pairing is completed, the Carkit is under the standby
mode with the blue LED flashing at a 3 second interval
NOTE: If the pairing cannot be completed within 2 minutes
after the pairing mode is activated, the Carkit will power off
automatically. Please repeat steps above to pair the Carkit and
mobile phone again.
6. Connection Link/Between Carkit and Mobile Phone
Your mobile phone will always indicate a connection icon
whenever your Carkit is paired. If the icon is not present, a
reconnection can be established by manually selecting the
Carkit from your mobile phone’s Bluetooth menu. If your Carkit
is set as an authorized Bluetooth device on your mobile phone,
an automatic reconnection can be established by pressing the
headset’s MFB button once.
Note: Your Carkit will be automatically switched off when it is
disconnected from a paired device for more than 10 minutes.
This special feature is incorporated to maximize your Carkit’s
standby/talk time. To reinstate the connection, simply repeat
the process for turning Carkit on.
Free2Talk
‘
Sun
-
Lite
’
USER GUIDE
