Fred’s Lab TOORO, Руководство пользователя и обслуживания

Страница: 17 / 66

5.8 Selecting a Multi 5 PRESET & MULTI MANAGEMENT
To dump a preset over USB MIDI, press and hold the SYSTEM button and then press the
Module button labelled LFO . This button also has a secondary vertical label DUMP
left to it.
You can dump back a preset from your computer or sequencer at any time. The T¨ o¨ or¨ o
will process any received dump without any prerequisites.
5.8 Selecting a Multi
There are 2 ways to select a multi:
ˆ
When alternate mode is selected via the ALT button, the multis can be cycled
through by pressing the PRESET button repeatedly.
ˆ
Press and hold the SYSTEM button. Then use the third parameter encoder labelled
MULTI to increment or decrement the multi number.
Multi selection M0..M9
5.9 Saving a Multi
First, make sure that alternate mode is enabled via the ALT button.
5.9.1 Overwriting the Current Multi
To save a multi onto the current memory location, press and hold down the PRESET
button until the display starts to blink. When the button is released, the multi will be
saved, replacing the data stored previously.
5.9.2 Saving a Multi to a Different Memory Location
Saving a multi to a different location can be done by copy & paste utilizing a temporary
buffer.
ˆ
Press and hold the SYSTEM button. Then press the Module button labelled
FILTER . This button also has a secondary vertical label COPY left to it.
ˆ
The multi is now stored inside a temporary buffer.
ˆ
Select the destination multi to be overwritten as described above under Selecting a
Multi .
ˆ
Press and hold the SYSTEM button. Then press the Module button labelled
ENV . This button also has a secondary vertical label PASTE left to it.
ˆ
The multi previously stored in the temporary buffer is now recalled.
ˆ
Press and hold down the PRESET button until the display starts to blink. When
the button is released, the multi will be saved.
17