FRC TH4C, Руководство по установке

Страница: 9 / 47

TH4C Installation Guide
p. 9
TH4C Installation
© Safe Fleet | May 2019 | All rights reserved
Document Number: XE-SNB2-TH4CPM-R0A
To update the Firmware version:
1. Power up the DVR using the vehicle ignition.
2. Insert the USB memory device with the new firmware version into the USB port on the DVR.
3. After the DVR starts up, right-click in the On-screen Display
and select:
Configuration

System

Program Update
4. In the Program Update tab, click Update . A confirmation
window appears.
5. Click Yes to proceed or No to cancel. Yes starts the
firmware update, and a progress bar displays the
percentage complete.
6. Once the update is finished, the DVR automatically restarts.
7. Remove the USB memory device.
Firmware Updates
Firmware controls how DVR features operate, including the Playback and Configuration menu displays. FRC may direct you
to install a firmware update when new features are added or specific issues are addressed.
The current firmware version appears in the top-right corner
of every Configuration menu. For instructions on opening the
Configuration menus, see TH4C Administration: Accessing the
On-Screen Display
.
Only install firmware updates as directed by Seon Service.
NOTE: Firmware Updates
After restarting, the DVR may take up to 3 minutes to load and complete the upgrade. Wait until the DVR finishes loading.
NOTE: Completing Upgrade
i
i