DF4000 Rev0204
4
INTRODUCTION
Overview
The
INSIGHT
digital flowmeter has a 4-digit LED flow display with daylight
bright digits 0.56 inch high. The flowmeter is able to communicate with other display
modules over the FRC datalink. This technology allows for remote displays, the display
of flow for multiple discharges (summing), and the totalization of flow for multiple
discharges (accumulation).
During normal operation flow rate information is provided from a paddlewheel
flow sensor or the datalink interface. This information is processed and shown on the
digital display as flow rate.
There are two operator selectable modes; display module identification and
program access. The digital display is used to show stored data or operator inputs
when a selectable mode is accessed. In the display module identification mode the
digital display will show the module serial number, manufactured date, software
revision, module function, and ID number. In the program access mode the digital
display will show operator inputs, program options, and error codes. The operator
selected modes are accessed and inputs are made by using two buttons on the front of
the display module.
All controls and indicators are located on the front of the display module.
Features
Display Module Identification and Program Access Modes
Datalink Interface
Multiple Flow Rate Calibration Points
High and Low Flow Warnings
Summing and Totalizing Flow
NFPA Color Coded Bezel (Optional)
Flow Conditioner (Optional)
