FDA700 Rev160509
4
GENERAL DESCRIPTION
Components
The three phase generator display consist of the following components:
Display Module
Signal Interface Module
Three (3) Current Sensors
Three (3) Voltage Transformers
Temperature Sensor (Optional)
Audible Alarm Buzzer (Optional)
Cables
Display Module
The display module is waterproof and can be mounted anywhere on the electrical
panel. The display module has a square flange with overall dimensions of 4 1/4" by 4 1/4".
A cutout hole of 3 3/4" in diameter is required.
Signal Interface Module
The signal interface module is waterproof with overall dimensions of 5 7/8" by
3 3/4" by 1 7/8". Clearance for the cables is required. This module is mounted close to the
current sensors and voltage transformers so the cable runs are short. Current and voltage
information is passed to the display module over a two wire datalink.
Current Sensor
The current sensors are used to measure current flow through a wire by
electromagnetic induction. Each phase wire to the main circuit breaker is run through
a current sensor opening (hole); one wire through each current sensor.
Voltage Transformer
The voltage transformers supplied work with 120 or 240 volt AC systems.
The transformers should be securely mounted inside the electrical box.
Temperature Sensor (Optional)
The optional temperature sensor is installed as required.
Audible Alarm Buzzer (Optional)
The optional buzzer is installed as required.
Cables
Refer to the Wiring Section.
Содержание FDA700 for Delta Winding
Страница 18: ...FDA700 Rev160509 18 NOTES ...
Страница 19: ...FDA700 Rev160509 19 NOTES ...
Страница 20: ...FDA700 Rev160509 20 ...