-4-
Getting Started
Installing Big League Baseball
To install and run Big League Baseball, your computer must meet these
specifications:
• an IBM PC or true compatible,
• an MS-DOS operating system, version 3.0 or higher,
• at least one 5.25 or 3.5 floppy disk drive,
• at least 640 kilobytes of RAM,
• at least 1.5 megabytes of free space on a hard disk drive, and
• a monitor.
Note: If a memory-resident program is installed on your computer, you may not have
sufficient RAM to run Big League Baseball. In that case, before installing Big League
Baseball, you should disable the memory-resident program.
____________________________________________________________________
1. Insert Disk 1 into drive A or B.
2. At the DOS prompt, type A: or B:
3. Type HRSETUP.
4. Press the Enter key.
You're asked to select a drive.
5. Press the up and down arrow keys to select a drive.
6. Press the Enter key.
You're asked to select a subdirectory name. Select HRS100 unless you already
have a subdirectory with that name on your computer.
7. Press the Enter key again. Then press Y.
Your computer copies Disk 1 to the drive you selected.
8. Follow the instructions on the screen.
