Franklin Fueling Systems TS-LS500, Руководство по установке

Страница: 36 / 40

32
Enabling/Disabling Lines
After learning the line(s), each line will need to be enabled to allow monitoring. The Line Status
reflects the current status.
Enabling Lines
At the T5 Series, EVO
TM
600, or EVO
TM
6000 console (LCD or by the web page), navigate to the
FMS Control screen. Press the Enable/Disable button to enable the line.
Only while the line is enabled will it continuously monitor and test pressure levels by activating
the STP as necessary.
Disabling Line Channels
At the T5 Series, EVO
TM
600, or EVO
TM
6000 console (LCD or by the web page), navigate to the
FMS>Lines Control screen. Press the Enable/Disable button to disable the line.
IMPORTANT: While the line is Disabled, FMS will neither maintain nor test line pressure levels.
If alarms or errors occur, please refer to the Alarms chapter of this guide.