10
C. Quick Connect Fittings
Your new NRS-1 Drinking Water Appliance is
outfitted with new generation of user-friendly quick
connect push-in fittings. Proper use of the fittings is
shown in the diagrams.
It is important that the tubing selected for use with
these connectors be of high quality exact size and
roundness, and with no surface nicks or scratches.
If it is necessary to cut the tubing, use a plastic
tubing cutter or sharp razor knife. Make a clean,
square cut.
An optional blue locking clip is installed in certain
fittings to provide extra security. Remove this clip
first before trying to remove tubing by sliding away
from fitting.
Should a leak occur at a fitting, the cause is usually
defective tubing.
To fix:
•
Relieve pressure
•
Release tubing
•
Cut off at least ¼” from end
•
Reattach tubing
•
Confirm connection is leak free
TO ATTACH TUBING...
TO RELEASE TUBING...
