Franklin Electric FPS MH Series, Инструкция по сборке и разборке

Страница: 7 / 12

5
Re-assembly Procedure
24. Use the alcool to lubiricate the static part
of the mechanical seal and then put the
seal into its housing.
26. Lubricate the mechanical seal,and slide
it down on the shaft. If available use the
supplied tool to ease this operation.
28. Position the washer, split rings and disk.
25. Place the seal plate as shown.
27. Bring the seal faces together and
remove the tool.
29. Position the impellers, the spacers and
pump stages.