background image

8

ï

 EN 

ð

These operating instructions contain relevant information 

and  precautionary  notes.  Please  read  the  manual 

carefully  before  assembling,  electrical  connection  and 

commissioning. 

General Observations

This  pump  has  been  developed  according  to  the 

most  advanced  and  recent  technology,  as  well  as  in 

compliance with the regulations in force. Moreover, the 

pump is subject to a permanent quality control. 

These  operating  instructions  are  intended  to  help  you 

better understand the pump operation and to show you 

its possible applications. 

The  manual  contains  important  information  necessary 

for reliable and profitable operation. Compliance with the 

operating instructions is of vital importance to ensure the 

reliability and a long service life of the pump, as well as to 

avoid any accident risk due to improper use. 

This pump must not be operated beyond the limit values 

quoted  in  the  technical  specification.  Any  indication 

concerning the nature, the density, the temperature, and 

the rate flow of the pumped liquid, as well as the rotation 

speed, the pressure and the power of the motor shall be 

observed. Any other instruction contained in this manual 

or in the documentation enclosed to the agreement shall 

be observed as well.

The  rating  plate  bears  the  type  series,  the  main 

operation data, and the serial number. Please, quote this 

information  in  all  request  of  intervention  or  assistance, 

and when ordering spare parts.

Safety regulations

This manual contains essential instructions that must be 

observed during installation, operation and maintenance. 

Therefore,  this  operating  handbook  must  be  read  and 

understood both by the person in charge of assembling 

the machine and by all qualified personnel appointed by 

the  responsible  for  installation  to  perform  its  operation. 

These operating instructions must always be available on 

use site of the machine.

Marking of coded instructions within the manual

The safety instructions contained in this manual, whose 

inobservance might cause hazards to person, are marked 

with the general hazard sign, i.e.: 

 

m

(hazard sign)

Risks due to inobservance of safety instructions

Inobservance of safety instructions may cause physical 

and material damages, as well as environmental pollution. 

Non-compliance with safety instructions will also lead to 

the complete loss of any warranty right.

In  particular,  the  inobservance  of  the  above  mentioned 

instructions may for example result in:

•  failure of main machine/unit functions;

•  failure of maintenance procedures;

•  hazard of electrical, mechanical or chemical nature.

Safety regulations

All safety instructions contained in this manual shall be 

observed,  as  well  as  any  other  national  regulation  on 

accident  prevention,  and  any  internal  regulation  on  the 

use of machineries and on occupational safety.

Safety  instructions  for  control,  maintenance,  and 

operation works

The person in charge must verify that all maintenance, 

inspection  and  installation  works  are  performed  by 

qualified  and  authorised  personnel.  Before  performing 

these works, the personnel must be aware of the content 

of this manual.

All  interventions  on  the  machines  must  be  carried  out 

only  during  total  standstill  of  the  mentioned  machines. 

Strictly observe the shutdown procedure described in this 

manual.  

Pumps  conveying  fluids  hazardous  to  health  must  be 

decontaminated.

Immediately  after  completion  of  work,  all  safety  and 

protective devices must be re-installed and/or re-enabled.

Modification and manufacture of Spare parts 

Any  reconstruction  or  alteration  of  the  machine  must 

be performed by the manufacturer before being carried 

out.  Original  spare  parts  and  accessories  supplied  by 

the manufacturer ensure safety. The manufacturer is not 

in  any  case  liable  for  damages  due  to  the  use  of  non-

original spare parts!

1 .  DELIVERY AND STORAGE
1 .1  Delivery

These  submersible  pumps  are  supplied  in  their  own 

original  packing  in  which  they  should  remain  until 

installation.

Avoid the pump to be bent when it is not packed, since 

this may cause the misalignment and the damage of the 

pump itself.

The loose data plate supplied with the pump should be 

fixed close to the electric control equipment.

The pump shall not be exposed to unnecessary impacts 

and crashes.

1 .2  Storage and Handling

Storage Temperature:

Pump: from -20°C to +60°C

The pump should not be exposed to direct sunlight.

If  the  pump  has  not  been  packed,  it  shall  be  stored 

horizontally,  adequately  supported,  or  vertically,  to 

prevent  the  misalignment  of  the  pump.  During  storage, 

the pump can be supported as shown in Fig. 1.

Содержание E-Tech Series







Отзывы: