Franke FCI604B1, Инструкция по эксплуатации, Страница: 10 / 20

10
Pan detection
The pan detection ensures a perfect safety.
The induction doesn’t work:
•
If there is no pan on the heating zone or if this pan is not adapted to the induction. In this
case it is impossible to increase the power and the display shows [ U ]. This symbol
disappears when a pan is put on the heating zone.
•
If the pan is removed from the heating zone the operation is stopped. The display shows
[ U ]. The symbol [ U ] disappears when the pan is put back to the heating zone. The
cooking continues with the power level set before.
After use, switch the heat element off: don’t let the pan detection [ U ] active.
Residual heat indication
After the switch off of a heating zone or the complete stop of the hob, the heating zones are still
hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far
as the residual heat indicators are on light, don’t touch the heating zones and don’t put any
heat sensitive object on them. There are risks of burn and fire.
Timer
The timer is able to be used simultaneous with all heating zones and this with different time
settings (from 0 to 99 minutes) for each heating zone.
•
Setting and modification of the cooking time :
Action Control panel Display
Zone selection Press key [ ] [ 0 ]
Increase power Press key [ ] [ 1 ] to [ 9 ]
To select « Timer » Press simultaneously [ ] and [ ] Timer [ 00 ] min
Decrease the time Press key [ ] [ 00 ]
wents to 30,29…
Increase the time Press key [ ] time increase
After a few seconds the control light stops with blinking.
The time is confirmed and the cooking starts until the time reaches [ 00 ].
•
To stop the cooking time :
Action Control panel Display
Zone selection Press key [ ] [ 0 ]
To select « Timer » Press simultaneously [ ] and [ ] The remaining time
To stop the « Timer » Press key [ ] [ 00 ] then stops
If several timers are activated repeat the process.
•
Automatic stop at the end of the cooking time :
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound rings.
To stop the sound and the blinking it is enough to press any key.