Franke 2152 00 23, Инструкция по установке и эксплуатации, Страница: 5 / 40

5
18-05
.098d
-GB.f
m
5. Scope of Delivery
6. Dimensions
7. Installation example
8. Assembly Instructions
8.1
Flush the pipes in compliance with DIN 1988.
8.2
Install the offset-type screw connector.
8.3
Install the screw rosettes.
8.4
Install the fitting.
!
Caution!!
Do not forget the mesh washer.
9. Function
9.1 Open both water flow volume regulators (a) SW 3.
9.2 Actuate the push-cap handle to start the flow of water.
☞
Water flow stops automatically, depending on the flow duration that has been set.
9.3 Turn the push-cap handle to select the desired temperature.
10. Adjusting flow duration
10.1
Use a screwdriver to carefully prise up the plug.
10.2
Remove the plug.
10.3
Use an Allan key (SW 2.5) to loosen the set screw.
10.4
Remove the push-cap handle.
10.5
Use a screwdriver to adjust the flow time.
a: Blade width 3 mm
+ longer flow time (max. 50 s)
Quantity Description
2 Offset-type screw connector, with mesh washers
and screw rosette
1 AQUAMIX self-closing single-lever mixer
1 Installation and operating instructions