Connect the Weighing Platform
(e)
connector into the COM PORT on the
rear of the machine. Then connect the LAN Cable
(f)
and Power Cable
(g)
to either side of the machine.
Open the cover. Place the Meter
(i)
into the meter compartment and push
backwards until it slots into position. Close the cover.
3
Machine components:
Machine Base
Feed Table with
Sealing Unit
Catch Tray
Weighing Platform
LAN Cable
Power Cable
Postage Meter
(PSD)
Ink Cartridge
Unpack all components from the box, remove packaging
and any transit tape.
1
Lift machine slightly on the left hand side and align the hooks to attach the Feed Table
(b)
–
align the catch tray to the right hand side of the machine
(c).
5
Lower Weighing Platform release panel at rear of the
machine. Place Weighing Platform
(d)
on top of the
machine and slide forward to lock. Lift panel to secure
and clip cable into place.
Insert the Ink Cartridge
(h)
into the machine with the ‘TOP’ and ‘LOCK’ stickers facing
upwards. Push the Ink Cartridge
(h)
towards the back of
the machine until you hear a ‘click’ - close the cover of the machine.
Turn on the machine using the switch behind the
Power Cable
(g)
and follow the steps on screen.
8
Press OK to start the installation.
9
Fn Series 5
Quick Installation Guide
For more help with your installation, please visit:
www.frama.co.uk/Fn5
Lift the cover of the machine to reveal the Ink
Cartridge
(h)
and Meter
(i)
locations.
2
6
4
Follow the step by step instructions.
OK
Installation Process
1 LAN
10
OK
Installation Process
Welcome to your mailing system. Press “OK”
to start the installation.
7
11
Your machine is now ready
to use. Please turn over
for your
Quick User Guide
.
Remove tabs from
print heads before
inserting into unit!
