Setting time PRELIMINARY
User Manual EML1101
12 Setting time
The date and the time can be set here.
28
Important:
If the time or date is incorrectly set, then
there are breaks in the data listed.
-
Set the digits with the cursor buttons.
-
Change from places with the ‘CR’ button.
-
Accept the settings with the ‘MENU’ button.
If a value is set outside the limits, (e.g. 31.02.99 12:14:26) the new setting will be dropped.
The day is
automatically calculated and set by the instrument after the set values have been adopted.
13 Counters
Date time setting
29.04.99 14:05:12 Monday
P1 P2
0000000000.0 0000000000.0
This menu item shows the counter status P1 for
profiles 1/3 and P2 for profiles 2/4. To reset the
counter status the
CR
button must be pressed but
Caution:
the cumulative counter values up to this time point are permanently deleted when
CR
button
is pressed.
If profile 1 or 3 is active then this is counted on counter P1, active profile 2 or 4 is counted on counter
P2.
A
reactive work
counter is not available.
14 Write protect
If this menu item is activated, then a data entry with identification numbers only is possible.
Independent of this entry, the
EML 1101
Maximum Demand Controller automatically switches to write
protect if no button is pressed within
1 hour
.
The last 4 numbers of the serial number are used as the ID number to be entered.
15 Info device
All data relating to the EML 1101 can be accessed under this menu item. No changes are possible
here.
