38
Doc Q7.0
Saving Changes
4.7
After making various changes, you will undoubtedly want to save the results of your edits.
To store a sound in place, without changing its name or location…
Press
to show the STORE screen.
Press
to initiate the process, and
again to confirm.
The message “STORED!” is displayed when the operation completes.
To store a sound to a new location or with a new name…
The Axe-Fx II has hundreds of numbered preset memory locations. It is possible at any time to save any preset into
any location. It is also possible to change the NAME of a preset before you store it.
Press
to show the STORE screen.
Use the
buttons to select between the two available functions:
The
LOCATION
parameter
selects where the preset will be stored:
The
wheel selects numbered memory locations.
left/right skip by 10.
Navigating down to the
NAME
parameter allows you to edit preset names before saving:
Turn the
wheel to select from all available characters.
The “ ” knob selects UPPER CASE letters.
The “ ” knob selects LOWER CASE letters.
The “ ” knob selects NUMBERS.
left/right or the “ ” knob will move the cursor position.
The “ ” button inserts a character at the cursor position.
The “ ” button deletes a character at the cursor position.
You can use up to 23 characters in a preset name.
Press
to Store, then press
again
to Confirm.
The message “STORED!” is displayed when the operation completes.
Swapping the Locations of Two Presets
4.7.1
The Axe-Fx II has a new feature that allows you to SWAP the locations of two saved presets. This is useful, for
instance, if you want to re-order without overwriting factory presets, or if you need to move a “keeper” preset to a
different location so you can overwrite its previous location with a newer entry. To SWAP two presets:
Press
and
to the right to the SWAP page.
Use
keys and the
wheel to select the two presets whose locations you want to switch.
Press
to Store.
Press
to Confirm. The message “SWAPPED!” will briefly appear when the operation
completes.
