Fraco SEP-5000, Руководство пользователя

Страница: 7 / 89

Transport platform SEP Serie
SEP u
ser’s manual Page 7 of 89
Doc no. RD-7243-MA-001-02
2. Safety
2.1. Warnings and symbols
The present manual is intended for any person proceeding to assembly, disassembly, operating
and/or maintenance of the platform.
Required training:
•
An operator must have successfully completed Level 1 (Safety and user) training and hold
a valid training card, be familiar with the content of the present manual and master operation
rules/regulations for the platform;
•
An installer must have successfully completed Level 2A or 2B (Installation) training and
hold a valid training card, be familiar with the content of the present manual and master
operation rules/regulations for the platform;
•
Before assembly, disassembly, operation or maintenance of the platform, you must read
and perfectly understand instructions found in the present manual, as well as the installation
manual. Not conforming to these safety instructions may general material damages, severe
wounds and even death. FRACO and/or its representative can in no case be held
responsible. All local norms and regulations applicable concerning safety and prevention of
accidents, environmental protection and all other activity related to assembly, disassembly,
operation and maintenance of this type of equipment are considered a supplement to the
present manual and must imperatively be respected, for example; the use of individual
protection equipment (harness, helmet, boots, etc.).
•
If the machine is installed in an area accessible to the public, access to the work zone must
be restrained with a fence of 8,20ft (2,5m) MINIMUM. The machine operator has the
responsibility to verify the stability and solidity of the fence.
•
Safety is our priority! For this reason, never remove or modify a part in order to adapt the
platform to a special condition. Contact FRACO for any assistance.
•
Use only parts from the official parts list.
∞REFER
TO THE PARTS BOOK (RD-7243-MA-003).
•
Keep this manual in proximity of the machine. The present manual is considered an
integral part of the platform and is mandatory to communicate the necessary safety
information’s to the operator and users. A copy of the present manual must always be
included in the waterproof compartment meant for that purpose on the platform.
∞S
EE SECTION
4.11 D
OCUMENTATION COMPARTMENT
,
ON PAGE
33.
•
Stickers and warnings. Make sure to read and understand all the stickers, warnings and
instructions displayed on the equipment, or to get explanations from a qualified person.
∞S
EE SECTION
4.10 D
ATA PLATES AND STICKERS
,
ON PAGE
31.