Fraco SEP-5000, Руководство пользователя

Страница: 11 / 89

Transport platform SEP Serie
SEP u
ser’s manual Page 11 of 89
Doc no. RD-7243-MA-001-02
2.4. Safety instructions
2.4.1. Safety during assembly and disassembly
•
The machine must be installed and dismantled according to the installation manual and
under the supervision of an authorised person specified by the contractor.
∞
S
EE THE
I
NSTALLATION
M
ANUAL
(RD-7243-MA-002).
•
The user has the responsibility, during assembly/disassembly, as well as during operation
and maintenance, to dictate instructions concerning the machine to any person(s) present,
so that all be effectively informed of safety instructions.
•
The user must make sure no unauthorised person is present on or near the machine.
•
Install the equipment in an exactly vertical and stable position, and anchor it to the
building.
•
Before starting work on site, get familiar with the work environment. For example,
obstacles in the work and circulating zones, bearing capacity of the ground and necessary
protection of the construction site.
•
Only charge and transport material that was carefully dismantled, wrapped and firmly
bound.
2.4.2. Safety during maintenance
•
Inspect before putting into service, recurrent and periodic inspections must be performed
according to the instructions in this manual, as well as according to local standards and
regulations.
•
Workers must be informed regarding type and scope of periodic inspections.
•
Results of periodic inspections must be recorded in the appendix of the present
user’s
manual.
•
Turn off the machine (turn off principal power supply) before maintenance.
•
The platform must be fixed with the appropriate material (travel blocking mechanism)
when work is being undertaken under the machine.
•
Authorised maintenance and repair work only by authorised and qualified persons.
Pay particular attention to the risks inherent to work on electric systems. Respect local
standards and regulations in effect regarding electrical work.
•
Correctly reassemble and verify all dismantled securities when maintenance is
completed.
•
Important! Independent conversions and modifications made to the machine
compromise security and are not authorised.
•
All spare parts must comply to the technical requirements of the manufacturer. Only use
parts from the official parts list.
∞
P
LEASE CONSULT THE PARTS BOOK
(RD-7243-MA-003).
2.4.3. Promoting use of the
user’s manual
User’s/installation manuals contain rules and reference to be considered by a contractor or
group of contractors and are contractual instructions delivered as part of management rights.
Employees are required to follow these instructions. The contractor must follow the
instructions for the prevention of working accidents and must inform the insured of the risks
inherent to their work as well as takes measures to avoid these risks.