FPG IN 5C08 Скачать руководство пользователя

Страница: 38 / 52

Part No.26107 Rev J August 2018

- 38 -

Inline 5000 Series Cabinets

Compliance

REFRIGERATED CABINETS

SPECIFICATIONS

Safety Aspects

These cabinets have been designed to comply with the relevant requirements of the
following specifications:

•

AS/NZS 3100 General Requirements for Electrical Equipment

•

AS/NZS 3182 Refrigerated Food Commercial Cabinets

•

AS/NZS 3820 Essential Safety Requirements

•

AS/NZS 4417 Marking of Electrical Products

IEC 60335

Household and Similar Electrical Appliances

– Safety

Part 1:

General Requirements

Part 2-24:

Particular Requirements for Refrigerating Appliances / Ice Cream Appliances and Ice Makers

EN 55014

Electromagnetic Compatibility Requirements for Household Appliances,
Electric Tools and Similar Apparatus

Part 1:

Emissions

Part 2:

Immunity - Product Family Standard

EN 61000

Electromagnetic compatibility (EMC)

Part 3-2:

Limits - Limits for harmonic current emissions (equipment input current up to and including 16A per phase)

Part 3:

Limits - Section 3: Limitations of voltage changes, voltage fluctuations and flicker in public low-voltage supply

systems, for equipment with rated current ≤ 16A per phase and not subject to conditional connection

Operational
Safety

This appliance is not intended for use by young children or infirm persons,
unless they have been adequately supervised by a responsible person, to
ensure that they can use the appliance safely.

Young children should be supervised, to ensure that they do not play with the
appliance.

Performance
Aspects

The refrigerated cabinets are HACCP compliant, with the following
performance:

Cabinet Operating Temperature

Average Internal Humidity

Test Conditions

+2° to +4°C

70% RH

25°C Ambient with 60% RH

NB:

Cabinets can also be supplied with an operating temperature of +16°C to +18°C

Improvements

REFRIGERATED CABINETS

SPECIFICATIONS

Ongoing
Development

FPG reserves the right to change specifications and construction, as part of
ongoing product improvement.

Содержание IN 5C08





















































Результаты поиска

Содержание IN 5C08

Отзывы:

Похожие инструкции для IN 5C08

Бренды по названию

Популярные бренды

FPG IN 5C08, Руководство по эксплуатации продукта

Результаты поиска

Содержание IN 5C08

Отзывы:

Похожие инструкции для IN 5C08

Бренды по названию

Популярные бренды