FPG IN 5C08, Руководство по эксплуатации продукта

Страница: 34 / 52

Part No.26107 Rev J August 2018
- 34 - Inline 5000 Series Cabinets
Gaskets
REFRIGERATED CABINETS
-
SERVICING
Qlon Gaskets The front door aperture is fitted with Qlon gaskets
along the top, bottom and on either side.
The gaskets are foam filled, and have T section
bases, which slide into aluminium extrusions.
Gasket
Replacement The top aluminium extrusion is in two halves,
with a 20mm gap at the centre.
The bottom
extrusion
has a gap at
one side.
To replace
the gasket,
pull the old one out of the extrusion. Cut the
replacement gasket to length, and feed it in
through the gap.
The side gaskets can be removed and replaced via gaps, at the
tops of the aluminium extrusions.
Rubber
Gaskets The rubber gaskets on sliding doors fit into T section slots in the door frames,
and can also be replaced if damaged.