FPG IN 4H08S, Руководство по эксплуатации продукта

Страница: 12 / 28

Part No. 26124 Rev. G September 2018
- 12 - Inline 4000 Series Cabinets
CLEANING
Cautions
HEATED CABINETS - CLEANING
Power ALWAYS TURN THE POWER SUPPLY OFF BEFORE CLEANING.
Water THIS UNIT IS NOT WATERPROOF. DO NOT USE A WATER JET SPRAY TO
CLEAN THE INTERIOR OR EXTERIOR OF THIS CABINET.
Exterior
HEATED CABINETS
-
CLEANING
Metal Surfaces Stainless steel or aluminium surfaces should be cleaned with hot soapy water or
a good quality metal cleaning compound. DO NOT clean surfaces with abrasive
pads or cleaners (e.g. Scotchbrite pads or Jif), as paint, stainless steel and
aluminium surfaces will be damaged.
Glass All glass should be cleaned using a good quality glass cleaner and a clean
cloth.
DO NOT use abrasive pads or cleaners, because they will damage the surface
of the glass.
Sliding Doors Sliding glass doors are located by
plastic guides at the top and bottom.
The doors can be removed for
cleaning by sliding the door to central
position, placing hands either side of
the door, lifting it up and then
swinging it out at the bottom.
When replacing doors, make sure
that they are located in the correct
slots, top and bottom. The left door
should be in the inner slots, and the
right door in the outer slots.
Sliding door tracks should be
vacuumed out regularly to keep
doors sliding freely.
Continued on next page