FP PostBase Скачать руководство пользователя страница 87

Страница: 87 / 204

Advanced settings & system information

14.4

User interface language

The PostBase One user interface supports multiple languages.

• Open the M

ENU

• Choose L

ANGUAGE

PostBase One opens the language adjust-
ment menu. The current setting is shown on
a dark background.

• Select the desired language.

The user interface language changes imme-
diately.

• S

AVE

the language setting shown.

The new language will remain selected until
you change the language again.

14.5

Standby time

The PostBase One franking machine will go to standby automatically if it is not used
for some time. The standby time is the time between your last operation and the time
PostBase One automatically goes to standby.

• Open the M

ENU

• Choose S

TANDBY

IME

PostBase One opens the standby adjust-
ment menu.

• Type the desired time.

• S

AVE

the specified standby time.

Содержание PostBase













































































































































































































Результаты поиска

Содержание PostBase

Отзывы:

FP PostBase, Руководство оператора, Страница: 87 / 204

Результаты поиска

Содержание PostBase

Отзывы: