FEATURES
- The state of the art electronic devices and optimized circuitry design reduces the interference to the RC set.
- The status of the UBEC is signalized by LED. If the UBEC works, the blue LED is on.
- Input reverse polarity protection (if the input battery is connected with reversed polarity the UBEC does not
work).
SPECIFICATION
Type
UBEC 3A
UBEC 6A
Function
Switching Voltage Regulator
Switching Voltage Regulator
Input Voltage
6...25 V DC
(2-6s Li-po/5-18 NiXX)
6...25 V DC
(2-6s Li-po/5-18 NiXX)
Output Voltage
5.0 V/6.0 V switchable
5.0 V/5.5 V/6.0 V switchable
Output Current
3 A cont. / 5 A burst
6 A cont. / 10 A burst
Dimensions
30x9x6 mm
45x23x10 mm
Weight
7 g
18 g
USING THE UBEC
1. Output voltage:
Select the reqired output voltage by positioning the jumper on the right side of
the UBEC.
CAUTION: Some servos may not be operated at higher voltage than 5.0 V!
2. Electric powered model with an OPTO ESC:
connect the UBEC directly to the flight battery
terminals keeping the correct polarity; the output connector plug into the „Battery“ socket of your
receiver (or any unused servo output).
black
red
BATTERY
6...25 V DC
ESC
OPTO
UBEC
Batt.
Throttle
RECEIVER
-
+
S
-
+
S
ESC
BEC
UBEC
Batt.
Throttle
RECEIVER
-
+
S
-
+
S
X
DISCONNECT (+) WIRE!
black
red
black
red
UBEC
Batt.
RECEIVER
-
+
S
BATTERY
6...25 V DC
BATTERY
6...25 V DC
3. IC engine powered model or a glider:
connect the UBEC directly to the receiver battery termi-
nals keeping the correct polarity; the output connector plug into the „Battery“ socket of your receiver
(or any unused servo output).
FOXY UBEC 3A, UBEC 6A
S w i t c h i n g V o l t a g e R e g u l a t o r s / S t a b i l i z e r s ( S B E C )
black
red
BATTERY
6...25 V DC
ESC
OPTO
UBEC
Batt.
Throttle
RECEIVER
-
+
S
-
+
S
ESC
BEC
UBEC
Batt.
Throttle
RECEIVER
-
+
S
-
+
S
X
DISCONNECT (+) WIRE!
black
red
black
red
UBEC
Batt.
RECEIVER
-
+
S
BATTERY
6...25 V DC
BATTERY
6...25 V DC
