DPT701 Digital Pressure Tester User’s Guide_English Version_V2.00
10
3.2 System Setup
This section illustrates how to program the scanner to meet your specific needs. Options typically
include:
● Select the language
● Change measurement unit (Bar or Psi)
● Save the plate number
Note
System Setup settings remain until changes to the existing setups are made.
To do system setup
1. Enter into the setup mode by pressing the OK key as soon as the tester is turned on (within 3
seconds).
3.2.1 Select Language
Selecting Language opens a screen that allows you to choose system language. The tester is set
to display English menus by default.
To configure system language
1. Scroll with the up and down arrow keys to highlight Language from Setup menu and press the
OK
key to confirm.
Figure 3-1 Sample Language Selection Screen
3.2.2 Select Measurement Unit
After confirming the language, the tester will automatically show the selection of measurement
unit. The tester is set to display BAR as default pressure standard.
To select measurement unit
1. Scroll with the up and down arrow keys to select
BAR/PSI
from Setup menu and press the
OK
key to confirm
Figure 3-2 Sample Measurement Unit Selection Screen
3.2.3 Save The Plate Number
The Plate Number will be used to send the test data to PC for further checking and printing when
the wireless receiver is connected with computer.
To Save The Plate Number
1. Press the data printing key
2. Input the plate number with the arrow keys.
3.2.4 Backlight
