7
Operating Instruction
7.2 Receiver Front and Rear Panels
1
HDMI Out1: Connect to a HDMI equipped TV/Monitor for display of the
HDMI input source signal
2
HDMI out2: Connect to a HDMI equipped TV/Monitor for display of the
HDMI input source signal
3
IR Out: Connect to the supplied IR blaster cable for IR signal transmission.
Place the IR blaster in direct line of sight of the equipment to be controlled
4
IR In: Connect to the supplied IR blaster cable for IR signal transmission.
Place the IR blaster in direct line-of-sight of the equipment to be controlled.
5
DC/12-24V: Plug the 24V DC power supply into the unit and connect the
adaptor to an AC outlet
6
Update: USB port to update the firmware
7
CAT5e/6 In : Connect to the transmitter unit with a single CAT5e/6 cable for
transmission of all data signals
8
RS232 Out: Connect to the device that is to be controlled via phoenix terminal
by RS-232 commands
