6
Operating Instruction
7. OPERATION CONTROLS AND FUNCTIONS
7.1 Transmitter Front and Rear
1
HDMI In: Connect to HDMI source equipment such as DVD or Blu-ray player
2
HDMI Out: Connect to a HDMI equipped TV/Monitor for display of the
HDMI input source signal
3
IR In: Connect to the supplied IR blaster cable for IR signal transmission.
Place the IR blaster in direct line-of-sight of the equipment to be controlled.
4
IR Out: Connect to the supplied IR blaster cable for IR signal transmission.
Place the IR blaster in direct line of sight of the equipment to be controlled
5
DC/12-24V: Plug the 24V DC power supply into the unit and connect the
adaptor to an AC outlet
6
Update: USB port to update the firmware
7
CAT5e/6 Out: Connect to the receiver unit with a single CAT5e/6 cable for
transmission of all data signals
8
EDID: Auto: default 4K@60Hz
Local: copy EDID from display of transmitter
Remote: copy EDID from display of receiver
9
RS232 in: Connect to a PC or laptop with phoenix terminal for the
transmission of RS232 commands
