MX16/MX16 Pro 16-Channel Radio Controller
User Manual
©
2020 FOXTECH All Rights Reserved
7
Working Conditions
Security
Power supply method and notes.
MX16 series ground unit has built-in integrated rechargeable lithium battery, which is compatible with the
market standard micro USB interface 5v/1.5A power adapter (such as mobile phone, camera and other
digital products USB charger) for charging.
If you encounter smoke, odor, or liquid leakage when charging on the ground unit, do not continue to
it. Please transfer it to our company for repair. Beginners should pay special attention to the following
safety issues! Do not charge the product in the baby’s touch area to avoid the risk of electric shock.
Do not charge this product in an environment exceeding 60 ° C
It is forbidden to fly when the body condition is not good, such as fatigue or drunkenness! It is forbidden to
fly in bad weather such as rain or strong wind!It is forbidden to fly near high-voltage lines, communication
base stations,or active places!It is forbidden to fly at airports and other places where it is forbidden to fly!
It is forbidden to control the flight model in places where people are concentrated, in parking areas, or in
other areas where property damage or personal injury may occur. Before the flight, check the equipment
of the aircraft and check whether the transmit and receive system and the aircraft are normal. After the
flight, turn off the power of the receiver and then turn off the power of the transmitter to prevent the engine
or motor from rotating and causing damage caused by the runaway protection function! Please use a
guaranteed professional charger to charge the battery.This product antenna is a fragile component, please
pay attention to avoid excessive damage.
Using Environmental Conditions1
-Environment temperature: -10 °C ~ +55 °C.
-Storage temperature: -25 ° C ~ +70 ° C.
-Relative humidity: no more than 85%.
-Atmospheric pressure: 86 kPa to 106 kPa.
-The use of the site is not allowed to explode dangerous media, the surrounding media should not contain
corrosive metals and insulating gas and conductive media, not allowed to be filled with water vapor and
serious mold.
-The place of use should have facilities to protect against rain, snow, wind, sand and ash