Foxtech Argus V3, Руководство пользователя

Страница: 3 / 23

Overview
Argus V3, the system adopts the world recognized best five lens tilt photography
system. which supports DJI psdk synchronously. Besides, it is compatible with
various kinds of UAVs in the market and matches with rich accessories.
Installation requirements
DJI psdk UAV adaptation scheme provides SKYPORT adapter ring and PTZ seamless
coupling control.
Non DJI psdk models provide fast mount board scheme, which is convenient for
connecting with UAV fuselage. Quick mount board supports most models on the
market, and special models can be customized.
The system supports DJI psdk coupling control, automatic interval exposure control
and external PWM Or high and low level (the level control is changed by software)
signal control. Connect the photo jack at the main control end of the control line to
the main control signal output port. The photo control port must be connected to
the corresponding main control signal port (different master control output ports
are different, please connect according to the corresponding interface).
At least enough space should be reserved under the fuselage for the Argus V3 host.
In order to prevent the tripod from being photographed in flight shooting, it is
recommended to use electric retractable landing gear or large landing gear.
The main engine of Argus V3 is 0.58kg. In order to ensure flight safety, it is
recommended to select the aircraft with the maximum payload of more than 1.8kg.