14 Morgan Ct.
Wayne, NJ 07470
ZIM
ZIM is 2 independent overdrives in one pedal.
Drive A has it's own Drive and Volume knobs, and an
internal tone trimmer. It also has it's own Input and
Output jacks.
Channel B has all of the same features, with the addi-
tion of a special voicing circuit that offers 8 selectable
stages of non-sweeping phase shift with the ability to
boost or cut the selected range of frequencies. This
adds up to a total of 16 different distinct voices from Ch
B. 17 if you include Ch B with the voicing off.
Switching jacks are used to provide a normal connection
from Channel A's out jack to Channel B's input jack,
making it so you don't have to manually patch the two
overdrives together.
Normal Signal Flow:
Ch A Input jack:
Acts as main input. Battery switching
done at ring connection.
Ch A Output jack:
Available for patching between A and
B or using as an individual output.
Ch B Input jack:
Available as independent B input, or as
a return from whatever A output was patched to. A wah
wah pedal works great between Ch A and Ch B!
Ch B Output jack:
Acts as main output.
Ch A Drive:
Controls the amount of overdrive on ch. A.
Ch A Volume:
Controls the amount of volume on ch. A.
Ch B Drive:
Controls the amount of drive on ch. B.
Ch B Volume:
Controls the amount of volume for ch. B.
Voice:
Selector knob clicks through 8 filter stages for the desired voicing
effect. This works in conjunction with the DEPTH control. When DEPTH
is in the center, VOICE settings will make no difference.
Depth:
Takes the filter stage selected by the Voice knob and sums it
with the drive B signal either positive or negative. CUT - cuts the select-
ed frequency range for a hollow type of sound. BOOST - boosts the
selected frequency range for a fat sound. Center detent disables the
Voice feature. On any given Voice setting, Boost and Cut have drastical-
ly different sounds. This adds up to a total of 16 available voices.
Bypass A:
True bypass for Ch A. When A is active, green LED is lit up.
Bypass B:
True bypass for Ch B. When B is active, red LED is lit up.
Size:
Width = 5 1/2” Depth = 5” Height = 3”
When planning space on a pedal board, add 1” to the depth if you're
using right angle plugs, add 2” if you're using straight plugs. Also, the
Height measurement of 3” represents the overall height, from the bottom
of the rubber feet to the top of the knobs. If you plan on removing the
rubber feet for mounting purposes, subtract 1/2”.
Weight:
2.7 Lbs.
Warranty:
3 Years from original purchase, parts and labor.
Owner’s manual
Ver .09 Jan, 04
For complete information on ZIM visit
www.foxroxelectronics.com
