11
7-1 Integrated Decoy Wiring Harness
The HammerJack 2 features an integrated decoy wiring harness (see image below) for connecting the Fox
Jack 4 decoy (included with the HammerJack 2). Unlike other decoys offered by FOXPRO that require their
own power supply and wired connection to the AUX jack, the Fox Jack 4 Decoy mounts directly to the back
of the HammerJack 2 and interfaces to the wiring harness for power and triggering of the decoy motion.
Please note that this wiring harness is designed to be used only with the Fox Jack 4 decoy! When you first
remove the battery compartment door from the HammerJack 2, you can find the wiring harness taped to
the upper right side of the battery compartment.
7-2 Using the Fox Jack 4 Decoy
The included Fox Jack 4 decoy mounts directly to the back of the HammerJack 2 game call. You can then
control the action of the Fox Jack 4 with the TX433 remote control and through FOXCAST sequences.
Combining the use of a decoy with the effective sounds on the HammerJack 2 provides you with a well-
rounded predator calling combination. After fooling their ears, the decoy will fool their eyes.
Connecting the Fox Jack 4 Decoy to the HammerJack 2
1.
Connect the Fox Jack 4 to the back of the HammerJack 2 by joining the 3-pin connector on the
Fox Jack 4 to the decoy wiring harness.
2.
Secure the Fox Jack 4 to the HammerJack 2 housing by inserting the tabs into the slots and then
tightening the knurled thumbscrew.
Turning on the Fox Jack 4 Decoy
1.
Ensure the Fox Jack 4 is properly connected to the HammerJack 2.
2.
Turn on the HammerJack 2 game call and the TX433 remote control. Be aware that the
HammerJack 2 must be turned on in order to power the Fox Jack 4 decoy.
3.
Locate the three-position slide switch on the side of the Fox Jack 4.
4.
Move the switch from the off position to the first on position. The second on position turns on
the integrated LED, which can be useful in nighttime operation to provide subtle illumination to
the decoy.
Activating the Decoy’s Motion
To operate the decoy (starting and stopping the motion), you will have to use one
of the remote control’s
User buttons. Choose which button (User 1 or User 2) you would like to assign that function, then follow
Содержание Hammer Jack 2
Страница 1: ......
