6
Color
Peak Beam Intensity (cd)
Max Beam Distance (m)
Red
45960
428
White
92080
606
Green
44400
421
The IR version generates a nominal radiant flux level of 1150 milliwatts at a wavelength of 950 nanometers.
The useful beam distance is determined largely by the sensitivity of the IR viewing equipment employed by
the user to detect the beam.
Battery Charging Information & Safety Precautions
The image below shows the Fire Fly Scan Light charge jack and charger. The Li-Ion rechargeable battery can
be recharged directly through the Fire Fly Scan Light. You can either charge your battery pack while the
battery pack is inside of the Fire Fly, or you can charge the battery pack externally. The images below show
the wall charger and the charge jack.
2-1
Internal Charging
1.
Turn off the Fire Fly.
2.
Make sure that the battery is properly connected inside of the battery compartment (see Section
1-3 for battery installation instructions).
3.
Connect the wall adapter to a standard wall outlet (up to 240VAC 50/60Hz).
4.
Connect the other end of the charger to the charge jack on the bottom of the Fire Fly grip (see
the image above). Upon connecting the charger to the Fire Fly, the LED on the charger will glow
red, indicating that the charging process is occurring. When the charge is complete, the LED on
the charger will turn green.
5.
Total charging time from depleted until full is approximately 2 hours.
2-2
External Charging
1.
Turn off the Fire Fly.
2.
Remove the battery compartment door from the Fire Fly and remove the battery.
3.
Notice the small, two-pin receptacle on the end of the wall charger. This receptacle accepts the
connector from the battery pack itself. Join the two connectors together.
4.
Plug the wall adapter into a standard wall outlet (up to 240VAC 50/60Hz).
5.
The LED on the wall adapter will glow red while charging and switch to green when complete.
Total charge time from depleted until full is approximately 2 hours.
Содержание FIRE FLY
Страница 1: ......
