Link Aggregation Configuration
58
policy
dst-mac|src-ip|src-mac}
3
Configure
system priority
lacp system-priority
priority
priority
ranges from 1 to 65535. The
default priority is 32768.
4(1)
Enter interface
configuration
mode
interface ethernet
interface_num
Enter the port mode which you want to
add to the aggregation group.
4(2)
Enter interface
range
configuration
mode
interface range ethernet
interface_list
If there are multiple ports to be added,
enter interface range mode.
5
Add a port to
the
aggregation
group
channel-group
channel-group-number
mode {active | passive}
channel-group-number
should be
existed .
6
Configure port
priority
lacp port-priority
priority
priority
ranges from 1 to 65535. The
default priority is 128.
7
Delete a port
from an
aggregation
group
no channel-group
channel-group-number
This command used in global
configuration mode is for deleting a
static aggregation group.
8
Back to global
configuration
mode
exit
9
Delete a
dynamic
aggregation
group
no channel-group
channel-group-number
This command used in interface
configuration mode is for deleting a port
from an aggregation group.
Delete all ports from the group first
before deleting the group.
7.6 Displaying and Maintaining Link
Aggregation Configuration
After the above configuration, execute the show command in any mode to display the
running status after the link aggregation configuration and verify your configuration.
Table 7-3 Display and maintain link aggregation configuration
Operation
Command
Description
Show system LACP ID
show lacp sys-id
System LACP-ID consists of
16-bit system priority and
48-bit system MAC.
Show port member info of the
aggregation group
show lacp internal
[
channel-group-number
]
Show neighbor port info of the
aggregation group
show lacp neighbor
[
channel-group-number
]
