FoxGate S6124, Руководство по управлению

Страница: 70 / 391

70
<ipadress>is the IP address of the TFTP server <filename> is the name of the file to be
downloaded via.
Special keywords used in filename:
Keywords source or destination address
startup-config start the configuration file
nos.img system file
Command mode: Admin Mode
Usage Guide: The commander distributes the remote upgrade command to members via
the TCP connections between them, causing the number to implement the remote
upgrade and reboot. Trying to execute this command on a non-commander switch will
return errors. If users want to upgrade more than one member, these switches should be
the same type to avoid boot failure induced by mismatched IMG files.
Example: Remotely upgrade a member switch from the commander switch, with the
member-id being 1, src-ul being ftp://admin:admin@192.168.1.1/nos.img, and dst-url
being nos.img
Switch#cluster update member 1 ftp://admin:admin@192.168.1.1/nos.img nos.img
2.12 debug cluster
Command: debug cluster {statemachine | application | tcp | packets}
no debug cluster {statemachine | application | tcp | packets}
Function: Enable the application debug of cluster; the no operation of this command will
disable that.
Parameters: statemachine: print debug information when the switch status changes.
application: print debug information when there are users trying to configure
the switch after logging onto it via SNMP, WEB.
tcp: the TCP connection information between the commander members.
Default: None.
Command Mode: Admin Mode.
Usage Guide: None.
Example: Enable the debug information of status change on the switch.
Swtich#debug cluster statemachine
2.13 debug cluster packets
Command: debug cluster packets {DP | DR | CP} {receive | send}
no debug cluster packets {DP | DR | CP} {receive | send}