FoxGate S6124, Руководство по управлению

Страница: 40 / 391

40
Default: Telnet server function is enabled by default.
Command mode: Global Mode
Usage Guide: This command is available in Console only. The administrator can use this
command to enable or disable the Telnet client to login to the switch.
Example: Disable the Telnet server function in the switch.
Switch(config)#no telnet server enable
1.2.11 telnet-server max-connection
Command: telnet-server max-connection {<max-connection-number> | default}
Function: Configure the max connection number supported by the Telnet service of the
switch.
Parameters: <max-connection-number>: the max connection number supported by the
Telnet service, ranging from 5 to 16. The default option will restore the default
configuration.
Default: The system default value of the max connection number is 5.
Command Mode: Global Mode
Usage Guide: None.
Example: Set the max connection number supported by the Telnet service as 10.
Switch(config)#telnet-server max-connection 10
1.2.12 ssh-server authentication-retries
Command: ssh-server authentication-retries <authentication-retries>
no ssh-server authentication-retries
Function:
Configure the number of times for retrying SSH authentication; the ―
no
ssh-server authentication-retries
‖ command restores the default number of times for
retrying SSH authentication.
Parameter: < authentication-retries > is the number of times for retrying authentication;
valid range is 1 to 10.
Command mode: Global Mode
Default: The number of times for retrying SSH authentication is 3 by default.
Example: Set the number of times for retrying SSH authentication to 5.
Switch(config)#ssh-server authentication-retries 5