330
Command Mode:
Global Mode
Default:
No RADIUS accounting server is configured by default.
Usage Guide:
This command is used to specify the IPv4/IPv6 address and port number
of the specified RADIUS server for switch accounting, multiple command instances can
be configured. The
<
port-number
>
parameter is used to specify accounting port number,
which must be the same as the specified accounting port in the RADIUS server; the
default port number is 1813. If this port number is set to 0, accounting port number will be
generated at random and can result in invalid configuration. This command can be used
repeatedly to configure multiple RADIUS servers communicating with the switch, the
switch will send accounting packets to all the configured accounting servers, and all the
accounting servers can be backup servers for each other. If
primary
is specified, then the
specified RADIUS server will be the primary server.
Example:
Sets the RADIUS accounting server of IPv6 address to 2004:1:2:3::2, as the
primary server, with the accounting port number as 3000.
Switch(config)#radius-server accounting host 2004:1:2:3::2 port 3000 primary
33.12 radius-server authentication host
Command: radius-server authentication host {
<ipv4-address >|<ipv6-address>
}
[port <port-number>] [key
<string>
] [primary] [access-mode {dot1x|telnet}]
no radius-server authentication host {
<ipv4-address >|<ipv6-address
>}
Function:
Specifies the IP address and listening port number, cipher key, whether be
primary server or not and access mode for the RADIUS server; the no command deletes
the RADIUS authentication server.
Parameters:
<ipv4-address >|<ipv6-address>
stands for the server IPv4/IPv6 address;
<
port-number
>
for listening port number, from 0 to 65535, where 0 stands
for non-authentication server usage;
<string>
is cipher key string;
primary
for primary server. Multiple RADIUS Sever can be configured and
would be available. RADIUS Server will be searched by the configured order if
primary
is
not configured, otherwise, the specified RADIUS server will be used last.
[access-mode {dot1x|telnet}]
designates the current RADIUS server only
use 802.1x authentication or telnet authentication, all services can use current RADIUS
server by default.
Command mode:
Global Mode
Default:
No RADIUS authentication server is configured by default.
Usage Guide:
This command is used to specify the IPv4/IPv6 address and port number,
Содержание S6124
Страница 311: ...311 Machine...
Страница 314: ...314...
Страница 318: ...318 am interface am ip pool 50 10 10 1 30 am mac ip pool 00 02 04 06 08 09 20 10 10 5 am ip pool 50 20 10 1 20...
