105
Command Mode:
Port Configuration Mode.
Usage Guide:
When configuring the optional TLV, each TLV can only appear once in a
message,
portDesc
optional TLV represents the name of local port;
sysName
optional
TLV represents the name of local system;
sysDesc
optional TLV represents the
description of local system;
sysCap
optional TLV represents the capability of local
system.
Example:
Configure that port ethernet 1/5 of the switch carries portDesc and sysCap TLV.
Switch(config)#in ethernet 1/5
Switch(Config-if-ethernet 1/5)# lldp transmit optional tlv portDesc
sysCap
7.10 lldp neighbors max-num
Command: lldp neighbors max-num <
value
>
no lldp neighbors max-num
Function:
Set the maximum number of entries can be stored in Remote MIB.
Parameters: <
value
>
is the configured number of entries, ranging from 5 to 500.
Default:
The maximum number of entries can be stored in Remote MIB is 100.
Command Mode:
Port Configuration Mode.
Usage Guide:
The maximum number of entries can be stored in Remote MIB.
Example:
Set the Remote as 200 on port ethernet 1/5 of the switch.
Switch(config)#in ethernet 1/5
Switch(Config-if-ethernet 1/5)# lldp neighbors max-num 200
7.11 lldp tooManyNeighbors
Command: lldp tooManyNeighbors {discard|delete}
Function:
Set which operation will be done when the Remote Table is full.
Parameters:
discard:
discard the current message.
delete:
Delete the message with the least TTL in the Remoter Table.
Default:
Discard.
Command Mode:
Port Configuration Mode.
Usage Guide:
When the Remote MIB is full, Discard means to discard the received
message; Delete means to the message with the least TTL in the Remoter Table.
Example:
Set port ethernet 1/5 of the switch as delete.
Switch(config)#in ethernet 1/5
Switch(Config-if-ethernet 1/5)# lldp tooManyNeighbors delete
Содержание S6124
Страница 311: ...311 Machine...
Страница 314: ...314...
Страница 318: ...318 am interface am ip pool 50 10 10 1 30 am mac ip pool 00 02 04 06 08 09 20 10 10 5 am ip pool 50 20 10 1 20...
