Foxcom SATLIGHT 7225H, Инструкция по установке и эксплуатации

Страница: 12 / 60

Panel Descriptions
page 4 Document no. 93-005-33-B2
1.3 Panel Descriptions
On the Front Panel of the 7225H IFL units are two LEDs. Both LEDs
should be on when the unit is in use. The following tables describe
the LEDs.
The LEDs on the Front Panel of the
7225H
Transmitter and Receiver
are:
LED Name LED Function
Laser
Indicates if the laser is functioning
RF Indicates if the RF signal is within the operating limits
[-25 to -5 dBm]
Table 1 7225HT Transmitter LEDs
LED Name LED Function
Opt. Indicates if the optical input power is above the minimal level [
−
3 dBm]
RF Indicates if the RF signal is within the operating limits
[-25 to -5 dBm]
Table 2 7225HT Receiver LEDs